Visit us:

Unit 26 Cuckoo Hill Farm,
Castlethorpe Road
Hanslope
Milton Keynes
MK19 7HQ

  Home > Optics >

Scope Alignment System
Scope Alignment System


 
List Price: £45.00 Inc VAT
Our Price: £45.00 Inc VAT

Quantity in Stock:1

Availability:: Usually Ships in 24 Hours
Product Code: SAS-MED
Qty:

Description
 
Machined from 6082 T6 aluminium hard black anodised and finished with the Shooting SHED logo laser etched both sides. These will maintain parallel to better than 0,01mm (Half a thou!) across the range.

At long last you can take the guess work out of setting your scope parallel to the scope rail with this affordable and easy gauging tool which enables rapid setup in seconds.

Simply slacken the screws off slightly so the tube can rotate in the rings with some resistance, slide the wedges into place with finger and thumb and squeeze them whilst rocking the tube, once the tube stops rocking nip the screws up very slightly, remove the wedges and torque the rings down, check once more by pushing the wedges back in and hold them up to the light.

Gap range 6mm-11,5mm, this levelling system will work with all flat based rifle scopes including Nightforce that are bolted to a common rail, the system will work with flat bottomed scopes over a round receiver as long as the top of the receiver goes over centre. It will not work with open top receivers.

Share your knowledge of this product. Be the first to write a review »